Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
196
Output parameters to the device
B Option bit for selection whether nonvolatile or volatile. B=0 is volatile condition.
When B=1, MAX Address which is set by the Set Max Address Ext command is
preserved by POR. When B=0, MAX Address which is set by the Set Max
Address Ext command will be lost by POR. B=1 is not valid when the device is in
Address Offset mode.
Sector Number Current Set Max LBA (7:0)
Sector Number Previous Set Max LBA (31:24)
Cylinder Low Current Set Max LBA (15:8)
Cylinder Low Previous Set Max LBA (39:32)
Cylinder High Current Set Max LBA (23:16)
Cylinder High Previous Set Max LBA (47:40)
Input parameters from the device
Sector Number (HOB=0) Set Max LBA (7:0).
Sector Number (HOB=1) Set Max LBA (31:24).
Cylinder Low (HOB=0) Set Max LBA (15:8).
Cylinder Low (HOB=1) Set Max LBA (39:32).
Cylinder High (HOB=0) Set Max LBA (23:16).
Cylinder High (HOB=1) Set Max LBA (47:40).
To Next Page
Loading...
