Need help?Do you have a question about the Hitachi HT-4139-28 and is the answer not in the manual?
Outlines the maintenance items covered in the manual.
Identifies and illustrates the main physical components of the scanner.
Explains the status indications provided by the device's LED indicators.
Describes the paper feeding and scanning mechanisms and their components.
Details the electronic control system, including microprocessors and boards.
Provides a visual representation of the scanner's functional blocks and connections.
Lists scheduled maintenance items and their procedures for regular upkeep.
Identifies consumable parts that require periodic replacement.
Provides instructions for cleaning various optical and mechanical parts of the scanner.
Details diagnostic items and their corresponding content for scanner operations.
Outlines the recommended sequence for checking and replacing scanner parts.
Instructions on setting the rotary switch for specific operational modes.
Describes the available operation items for off-line testing and procedures.
Step-by-step guide on how to perform the automatic calibration process for the scanner.
Instructions on how to view device operation details, such as sheet counts and roller status.
Procedures for downloading firmware and displaying firmware versions.
Guide for saving and loading device-specific unique information.
Instructions for performing a memory dump for problem analysis.
Procedure to reactivate the device by rebooting it.
How to display and interpret error information from the scanner.
Tool for viewing and modifying operational information like roller counts.
Overview of on-line diagnostic functions for checking device condition.
Essential steps and tools before starting part replacement procedures.
Overview of general parts replacement categories and their instructions.
Detailed procedures for replacing specific maintenance parts.
Instructions on how to check and adjust belt tension for various motors.
Procedures for checking and adjusting guide gaps related to latch parts.
Guidance on checking the interlock switch functionality when it's replaced.
Method to check the pressure of the reverse roller using a tension gauge.
Steps for adjusting the imprinting gap between the head and the roller.
Procedures for checking the reverse roller pressure and adjusting hook position.
Steps to adjust the ribbon holder and attach the DC motor correctly.
Lists the necessary tools and their specifications for performing maintenance on the HT4139.
To Next Page
General