Hitachi HUS VM - Page 378

raidcom initialize ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E10 0004 The specified LDEV is used for a Thin Image pair or
a Copy-on-Write Snapshot pair.
Get Command
Status
Async 2E10 0008 The specified LDEV is used on the system disk.
Get Command
Status
Async 2E10 0010 LDEV is not blocked.
Get Command
Status
Async 2E10 0012 The specified LDEV is a CC/XRC attribute device.
Get Command
Status
Async 2E10 0062 The specified LDEV is used as the primary volume
of a GAD pair.
Get Command
Status
Async 2E10 0063 The specified LDEV is used as the secondary
volume of a GAD pair.
Get Command
Status
Async 2E10 0100 The formatting operation cannot be performed
because the encryption value of the key number
that is set to encryption ECC is invalid.
Get Command
Status
Async 2E10 0101 The formatting operation cannot be performed
because the check sum of the encryption key is not
coincident.
Get Command
Status
Async 2E10 0210 The specified LDEV cannot be operated because
capacity saving status is Failed.
Get Command
Status
Async 2E10 6022 The operation cannot be performed because the
deduplication system data volume of the pool
linked with the specified LDEV is blocked.
Get Command
Status
Async 2E11 0007 The LDEV is in shredding.
Get Command
Status
Async 2E11 0009 The operation cannot be performed because LDEV
is now expanding.
Get Command
Status
Async 2E11 001E The operation cannot be performed because the
virtual disk space is blocked.
CMDRJE Executing 2E11 0053 The specified LDEV is used in another operation.
CMDRJE
Get Command
Status
Executing/
Async
2E11 0060 The operation failed because accelerated
compression of the parity group to which the
specified LDEV belongs is enabled.
Get Command
Status
Async 2E11 0102 The parity group of the target LDEV is in the state
of correction copy.
CMDRJE Executing 2E11 0153 The parity group or the external volume group to
which the specified LDEV belongs is used in
another operation.
CMDRJE Executing 2E11 0201 The operation cannot be performed because the
parity group format is not done for the parity group
to which the specified LDEV belongs.
9-54
Troubleshooting
Command Control Interface User and Reference Guide