Table 9-109 SSB codes returned by raidcom get resource
raidcom get resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2EF0 FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
Table 9-110 SSB codes returned by raidcom map resource
raidcom map resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The specified LDEV number or the LDEV number
for the virtual volume is out of the range.
CMDRJE Executing 2E00 0003 SSID is not with in the valid range.
CMDRJE Executing 2E00 000E The specified emulation type of the LDEV is not
supported in this command.
CMDRJE Executing 2E00 002B The specified attribute of the virtual LDEV is not
supported.
CMDRJE Executing 2E00 002C The specified attribute of the virtual LDEV is
invalid.
CMDRJE Executing 2E00 2205 You cannot execute the command because a
parameter required for the virtualization was not
specified.
CMDRJE Executing 2E00 9301 The specified emulation type is invalid.
CMDRJE Executing 2E10 0055 The specified LDEV cannot be operated because it
belongs to the default virtual storage machine.
CMDRJE Executing 2E10 0059 The specified volume cannot be operated because
the LDEV number of the specified volume does not
match the LDEV number of the virtual volume.
CMDRJE Executing 2E10 8000 The operation cannot be performed because
Storage Navigator or Device Manager - Storage
Navigator is in progress, another application is in
progress on the SVP, or the configuration is being
changed. Wait a while, and then retry the
operation.
CMDRJE Executing 2E21 9305 The information of the virtual storage machine is
already set in the specified resource.
CMDRJE Executing 2E21 9307 The specified virtual LDEV number is already exist
in the virtual storage machine to which the
specified LDEV belongs.
CMDRJE Executing 2E21 9308 You cannot operate the LDEV that has the LU path
definition.
Troubleshooting
9-159
Command Control Interface User and Reference Guide
To Next Page
Loading...
