raidcom map resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E22 0001 The specified LDEV is already defined.
CMDRJE Executing 2E30 0013 The specified volume cannot be set because it is a
LUSE volume.
CMDRJE Executing 2E30 0088 The specified LDEV cannot be operated because it
has an attribute.
CMDRJE Executing 2E30 0089 The specified LDEV cannot be operated because
the ldev has a reserve attribute for GAD.
CMDRJE Executing 2E30 008A The specified LDEV is used for a GAD pair.
CMDRJE Executing 2E30 008C The specified LDEV cannot be set the information
of the virtual volume because it is not virtualized.
CMDRJE Executing 2ECA FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EF3 2202 The specified operation cannot be performed
because it is not supported.
Table 9-111 SSB codes returned by raidcom unmap resource
raidcom unmap resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E10 0000 The specified LDEV number or the LDEV number
for the virtual volume is out of the range.
CMDRJE Executing 2E10 004F The specified LDEV for the virtual storage machine
is not defined in the specified LDEV.
CMDRJE Executing 2E10 005E The specified LDEV is used by the TrueCopy pair or
the Universal Replicator pair.
CMDRJE Executing 2E10 8000 The operation cannot be performed because
Storage Navigator or Device Manager - Storage
Navigator is in progress, another application is in
progress on the SVP, or the configuration is being
changed. Wait a while, and then retry the
operation.
CMDRJE Executing 2E21 9012 The Resource Partition Manager is not installed.
CMDRJE Executing 2E21 9306 The information of the virtual storage machine is
not set in the specified resource.
CMDRJE Executing 2E21 9308 You cannot operate the LDEV that has the LU path
definition.
CMDRJE Executing 2E30 000C The specified LDEV is used as a quorum disk.
CMDRJE Executing 2E30 000F The specified LDEV is used as a journal volume.
9-160
Troubleshooting
Command Control Interface User and Reference Guide