Need help?Do you have a question about the Hitachi HV-C20M and is the answer not in the manual?
General| Sensor Type | CCD |
|---|---|
| Horizontal Resolution | 480 TV lines |
| Lens Mount | C/CS Mount |
| Scanning System | 2:1 Interlace |
| Synchronization | Internal/Line Lock |
| Signal-to-Noise Ratio | 50 dB |
| Resolution | 752 x 582 (PAL) |
| Effective Pixels | 752 x 582 (PAL) |
| Video Output | 1.0Vp-p composite video, 75 ohms |
| Power Supply | 12V DC/24V AC |
| Power Consumption | 3.5W |
| Operating Temperature | -10°C to 50°C |
Describes C-mount lens use, high resolution, sensitivity, and SNR.
Explains ALC features and auto shading correction function.
Details PC control via RS-232C and differences between HV-C20/C20M.
Lists all items included in the camera package.
Lists essential safety warnings for camera operation and handling.
Covers environmental requirements, placement, and cleaning instructions.
Describes common CCD phenomena like smear, fixed pattern noise, moire, and ghosting.
Guides on lens compatibility, optical characteristics, and mounting cautions.
Provides steps for adjusting focus after lens replacement.
Identifies and explains the function of various camera connectors and switches.
Lists technical details for optical system, imaging device, resolution, and sensitivity.
Specifies signal types, levels, and connector pin assignments for inputs and outputs.
Illustrates the menu structure and navigation using switches like MENU, SEL, UP/DOWN.
Details settings for camera mode, white balance presets, and shading correction types.
Explains AGC ON/OFF modes, gain limits, and specific gain settings.
Describes various electronic shutter modes including OFF, EXT, AES, Var., Lock Scan, and Field-on-demand.
Covers advanced settings for detail, gamma, contrast, knee, and CCD integration.
Details adjustments for master, R, and B black levels, gain, and sync signal parameters.
Explains auto black balance, remote control baud rate settings, and ID/title setup.
Describes how to enable/disable iris gate and adjust its area size and position.
Covers selection of auto iris lens type (DC/VIDEO) and genlock input impedance.
Details coarse and fine adjustments for subcarrier phase and horizontal sync phase.
Explains how to set the ID number and title display position and enter data.
Provides step-by-step instructions for manual white balance adjustment and explains real-time auto white balance.
Details auto shading correction modes, procedures, and troubleshooting for error messages.
Illustrates how AGC, Lens, and AES functions combine to form ALC.
Provides pinout details for various connectors and shows the camera's physical dimensions.
To Next Page
