Hitachi M 12V - Feed Screw Assembly Use; Dust Collection and Scale Use

(2)
Feed
screw ass'y
The
feed screw
assembly can be used
to make fine
adjustments in the
distance between
the bit and the
parallel guide or
trimmer guide. Attach
the
feed
screw
to
the parallel guide or the trimmer guide as
shown in
Fig. 23.
and then attach the
rod
to
the
base
using
the nuts
provided.
Turn the
feed screw
to
make fine adjustments.
Push the button on the feed
screw to release
the grip
of
the
screw and allow
fast
movement of the
guide.
Fig. 23
3. Model
M12V, M12SA,
M8V,
M8
(1)
Dust corrector
set
Used
to collect
cutting particles
by connecting
a
cleaner.
(2)
Scale
(Unit : mm)
Used when setting
the cutting depth
in mm
units
I4