Hitachi NAS Platform 4000 Series - Finalizing and Verifying the System Configuration

18. Recongure the server to the previous settings:
■ IP addr
esses for Ethernet ports 0 and 1
■ Gate
way
■ Domain name
■ Host name
The SMU should recognize the node as the same and allow it to be managed.
19. Navigate to Home > Server Settings > License Keys to load the license keys.
20. Repeat steps for any other replacement servers to be congured.
Finalizing and verifying the system configuration
On the ne
w server:
Pr
ocedure
1. Navigate to Home > Status & Monitoring > System Monitor to verify the server
status:
■ If the server is oper
ating normally
, and is not displaying any alarm conditions,
run a backup to capture the revised conguration, and then download another
diagnostic to support. Permanent license keys for the new server will be
provided within 15 days.
■ If the server is not operating normally for any reason, contact support for
assistance.
2. Navigate to Home > Status & Monitoring > Event Logs, and then click Clear Event
Logs.
3. Conrm all nal settings, IP addresses, customer contact information, service
restarts, client access, and that customer expectations are all in place. Features such
as replication and data migration should all be conrmed as working, and all le
systems and storage pools should be online.
Finalizing and verifying the system conguration
Appendix A: Server replacement procedures
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 122