EN
4 OPERATION
4.1 OPERATION START/STOP
Press “ ” (run/stop). The run indicator will
be turned on/o and the operation will be
started or stopped accordingly.
? NOTE
• Oncethe temperatureandair volumesettings
areset,thesettingstatusisstoredanddoesnot
needtobereset.
• After the heating operation is stopped, it may
continuetoFANoperationforabout2minutes.
4.2 BASIC OPERATION
1 Wired controller Power ON.
Connecting ...
2 Air Conditioner OFF
When air conditioner is o, press “ ” or “ ”
to switch below items:
"Temperature" ↔ "Mode" ↔ "Fan Speed"
↔ "Menu".
- Temperature
- Mode
- Fan Speed
- Menu
Operation
PMML0564 rev.1 - 09/2021
4