Hitachi PC-ARFG-E - Operation Mode

EN
3 Air Conditioner ON
When air conditioner is on, press “ ” or “ ”
to switch below items:
“Temperature” ↔ “Mode” ↔ “Fan Speed”
↔ “Louver” ↔ “Menu”.
- Temperature
- Mode
A
A
A
A
Cool
Mode
Cool Fan Speed LouverTemp Menu
- Fan Speed
L
Fan Speed
Low
Cool Fan Speed LouverTemp Menu
- Louver
Cool
Fan Speed
LouverTemp Menu
INDV
Louver
Indirect air
- Menu
Cool
Fan Speed Louver Menu
Service & Installation
Screen Display Setting
Function Menu
Menu
Contact Information
Temp
(Mon) 16:30
4.3 OPERATION MODE
Heating mode is only available when the
indoor unit supports cooling and heating.
Cooling only machine cannot support
heating.
Operation mode setting
1 Press “ ” or “ to select “Mode”.
A
A
A
A
Cool
Mode
Cool Fan Speed LouverTemp Menu
2 Set the operation mode with “ ” or “
”. The operation mode is switched in the
following order:
“Cool”↔“Heat”↔“Dry”↔“Auto”↔“Fan”
If dual setpoint is selected in auto mode,
both cooling setpoint and heating setpoint
can be selected.
By default, temperature is as follows
when the cooling/heating mode changes:
• Temperature switch from cooling mode
to heating mode: Room temperature =
Heating set temperature -1°C
• Temperature switch from heating mode
to cooling mode: Room temperature =
Cooling set temperature +1°C
? NOTE
Thefunctionselectionsettingisrequiredfor“Auto”
operation. Contact your distributor for detailed
information.
Operation
PMML0564 rev.1 - 09/2021
5