EN
4.4 TEMPERATURE SETTING
1 Press “ ” or “ ” to select “Temp”.
2 By pressing “ ” , the temperature is
increased by 0.5
º
C to a maximum of 30
º
C.
By pressing “ ”, the temperature is
decreased by 0.5
º
C.
3 Cooling, Dry, Fan operation: A minimum
of 19
º
C.
4 Heating operation: A minimum of 17
º
C.
? NOTE
• Dependingonthetypeandsettingoftheindoor
unit,itmaynotbepossibletosetthetemperature
by1ºF(0.5ºC).
• Themax./min.temperaturemaydierdepending
onthetypeofindoorunit.
• Minimum and maximum temperature set-
point limits can be congured by selecting a
coolinglowerlimitandheatingupperlimitinthe
“FunctionSelection”mode.
• When the “Automatic Reset of Setting
Temperature” function is selected, the
temperature is automatically returned to the
preset temperature after the temperature set-
pointchange.
• Contactyourdistributorfordetailedinformation
about“AutomaticResetofSettingTemperature”
and “Cooling Lower Limit Value and Heating
Upper Limit Value for Setting Temperature”
functions.
4.5 FAN SPEED
1 Press “ ” or “ ” to select “SPEED”.
L
Fan Speed
Low
Cool Fan Speed LouverTemp Menu
2 By pressing “ ” or “ ”, the fan speed
changes as follows.
A
Auto
High 2
High 1
Med
Low 2
Low
∧ ∨
∧ ∨
∧ ∨
∧ ∨
∧ ∨
? NOTE
• During dry operation, the fan speed is
automaticallychangedto“LOW”andcannotbe
changedtoanotherfanspeed.(“LOW”isNOT
displayedontheliquidcrystaldisplay(LCD)at
thistime.Thepresentsettingstatusisdisplayed
ontheLCD.)
• Some of the fan speed settings as “High2” or
“Auto”may notbe availabledependingonthe
indoorunittype.
4.6 LOUVER SWING DIRECTION
1 Press “ ” (On/O). Make sure that the
power is ON. Press “ ” or “ ” and select
“Louver”.
2 By pressing “ ” or “ ”, the louver
direction changes as below diagram , and
the direction of dierent types of louver is
displayed dierently.
LCD
indication
Auto-swing
Range for COOL and DRY
Auto-swing range for COOL and DRY
Range for HEAT and FAN
Auto-swing range for HEAT and FAN
COOL,
DRY
HEAT,
FAN
Operation
PMML0564 rev.1 - 09/2021
6