Hitachi PC-ARFG2-Z - 25. ESP Setting

25. ESP Setting
44
A16381H9HF
25. ESP Setting
This function is used for adjusting External Static Pressure (ESP). It is available only for selected airCore 700
ducted indoor units that support this feature.
NOTES:
•
This function is exclusively available when the system is connected to airCore 700 ducted indoor units that
support Auto ESP setting. Please conrm the indoor unit compatibility with your service agent.
•
If you are using two wired remote controllers, you can congure this function solely through the primary wired
remote controller.
1. ESP Setting
Step1. Select "Service Menu" on the Service & Installation screen
and press "OK".
Step2. Select "ESP Setting" and press "OK".
Step3. Press" " or " " to select the setting item.
Step4. Press "OK" to conrm the selection.
2. ESP Standard Setting
Step1. Select "ESP Standard Setting" on the ESP Setting screen
and press "OK".
Step2. Select the indoor unit by pressing " ", " ", " ", or " "
and press "OK".
(This screen is NOT displayed when only one indoor unit
is connected with the controller. In this case, "Step3" is
displayed.)
Service & Installation
Check Menu
Installation Menu
Service Menu
OK
Select Back
(Mon) 16:30
Service Menu
ESP Setting
Simple Maintenance
Backup System Setting
Cool/Heat Auto Changeover
OK
Select Back
(Mon) 16:30
ESP Setting
ESP Manual Setting
Display ESP Setting
ESP Auto Setting
ESP Standard Setting
OK
Select Back
ESP Setting
ESP Manual Setting
Display ESP Setting
ESP Auto Setting
ESP Standard Setting
OK
Select Back
ESP Standard Setting
01-00
ALL
01-01
01-02
OK
Enter Back
01-03