Hitachi PC-ARFG2-Z - Page 49

25. ESP Setting
46
A16381H9HF
b. Press "OK" in Checking ESP screen.
b-1 Select "Yes" and press "OK" to stop auto ESP,
select "Continue" and return to Step2 to select
another indoor unit for auto ESP. Or select "Complete"
to return to Step1.
b-2 Select "Cancel" to continue auto ESP.
Step5. Press" " again to return to ESP Setting screen.
NOTES:
•
If two wired remote controllers are connected, when the primary wired remote controller starts auto ESP, the
secondary wired remote controller will turn to auto ESP screen from home screen automatically, and turns
back to home screen only if:
a. the auto ESP is stopped or completed.
b. 120mins passed
•
In auto ESP process, pressing On/Off button is not valid.
4. ESP Manual Setting
Step1. Select "ESP Manual Setting" on the ESP Setting screen
and press "OK".
Step2. Select the indoor unit by pressing " ", " ", " ", or " "
and press "OK".
(This screen is NOT displayed when only one indoor unit
is connected with the controller. In this case, Step3 is
displayed.)
Step3. Press " " or " " to change the ESP value.
a. Press " " to select "
OK
" and press "OK" to save the setting
and return to Step2.
b. Press " ", the "Change ESP setting to this value" shows,
select "Yes" and press "OK" to conrm the value change.
ESP Setting
ESP Manual Setting
Display ESP Setting
ESP Auto Setting
ESP Standard Setting
OK
Select Back
ESP Manual Setting
01-00
ALL
01-01
01-02
OK
Enter Back
01-03
ESP Manual Setting
Pa150
OK
Back
ESP Manual Setting
OK
Select Back
OK
Change ESP setting to this value?
Yes Cancel
ESP Auto Setting
OK
Select Back
Stop Auto ESP now?
Yes Cancel