5. Function Menu Screen Display
26
A16381H9HL
5.5.2 Schedule Turn ON/OFF Setting
1. Turn ON / OFF the schedule
Step1. Select "Power Saving/Night Quiet Schedule" on the
"Function Menu" screen and press "OK".
•
If the sub remote controller or indoor unit does not
support power savings, the power saving schedule
setting screen for intermittent operation control
(Step3) is displayed.
Step2. Press " " or " " to select the item to be set, and then
press "OK", the items are changed as follows:
"Capacity Control"
↔
"Intermittent Control"
↔
"Night
Quiet Operation".
•
If the current time is not set, the "Adjusting Date/
Time" setting screen is displayed.
•
If no schedule or holiday has been set, Step4 of "5.5.1
Schedule Day and Time Setting" is displayed.
Step3. Press " " or " " to select "Turn ON/OFF Schedule, and
then press "OK".
•
When the schedule is ON, "Turn OFF Schedule"
displayed.
Step4. Press " " or " " to select "Yes" and then Press "OK".
Step3.
Function Menu
Power Saving/Night Quiet Schedule
Power Savings Setting
Night Quiet Operation
Operation Schedule
Simple Timer
BackOK Select
(Mon) 16:30
Power Saving/Night Quiet Schedule
Intermittent Control
Night Quiet Operation
Capacity Control
Set when schedule is used.
* Power Savings mode setting activated too.
BackOK Select
(Mon) 16:30
Intermittent Control
Turn OFF Schedule
Turn OFF
Schedule
Mon
Tue
Wed
Thu
Fri
Sat
Sun
0 6 12 18
ON
(Mon) 16:30
BackOK to turn on/off schedule
Intermittent Control
OK
Select Back
(Mon) 16:30
Yes Cancel
Turn OFF Schedule
To Next Page
Loading...
