Hitachi PC-ARFP1E - Compressor Preheating Cancellation


Compressor Preheating Cancellation
This function cancells the compressor preheating control.
1 Press and hold “ ” (menu) and “ ” (return) simultaneously for
at least 3 seconds during the normal mode (when unit is not
operated). The test run menu will be displayed.
COMP Preheating CANC
Contact Information
2 Select “COMP Preheating CANC” from the test run menu
pressing “ ” and “OK”.
3 The conrmation screen will be displayed.
COMP. Preheating Control CANC
Cancel preheating control
for compressor?
4 Select “Yes” and press “OK”. The test run menu will be
displayed after the setting is conrmed. If “No” is pressed, the
screen will return to test run menu.
5 Press “ ” (return) on the test run menu to return to the normal
mode.
FUNCTION SELECTION AND SETTING
PMML0404A rev.1.1 - 06/2022
16