Hitachi PC-ARFP1E - Louver Open;Close Control; Ventilation Control

14.7 LOUVER OPEN/CLOSE
This function is used to fully open louver for adjusting the
vertical deector for air ow direction (manually).
This function cannot be set when the unit is operated.
1 Select “Louver Open/Close” from the menu and press “OK”.
Menu
Motion Sensor Setting
Total Heat Exchanger SET
VENTI
Louver Open/Close
02
/
03
Louver Setting
15:10(Fri)
ENT
.R
TN.SEL.
OK
OK
OK
2 Select “Yes” by pressing “ ” or “ ” and press “OK”. The
louver will be open (closed) and the screen will return to the
normal mode.
OK
Open louver?
Louver Open/Close
Yes No
SEL. ENT
.R
TN.
OK
OK
14.8 VENTILATION

Function
• A/C (Air Conditioning):
To operate the air conditioner individually.
• VENTI (Ventilation):
To operate the total heat exchanger individually.
• A/C+VENTI:
To operate the air conditioner and the total heat exchanger
together.
? NOTE
This function is available only when the total heat exchanger is connected.
1 Select “VENTI” from the menu and press “OK”.
Menu
Motion Sensor Setting
Total Heat Exchanger SET
VENTI
Louver Open/Close
02
/
03
Louver Setting
15:10(Fri)
ENT
.R
TN.SEL.
OK
OK
OK
2 By repeatedly pressing “ ” or “ ”, the indication is changed
in order of “A/C”, “VENTI” and “A/C + VENTI”. Select the
operation target and press “OK”. The conrmation screen
will be displayed.
OK
VENTI
SEL'D UNIT
A/C + VENTI
ENT
.R
TN.ADJ
OK
OK
3 Select “Yes” by pressing “ ” or “ ” and press “OK”. The
setting will be conrmed and the screen will return to the
normal mode.
OK
Fix desired mode?
VENTI
Yes No
SEL. ENT
.R
TN.
OK
OK
MENU OPERATION
PMML0404A rev.1.1 - 06/2022
30