P5416537
Model: PC-LH3A, PC-LH3B
Operation & Installation Manual for
Wireless Remote Control Switch (Unidirectional Type)
1
IMPORTANT NOTICE:
l
HITACHI pursues a policy of continuing improvement in design and performance of products.
The right is therefore reserved to vary specications without notice.
l
HITACHI cannot anticipate every possible circumstance that might involve a potential hazard.
l
This kit is designed for combination of HITACHI Air Conditioners.
Do not use this kit itself or combination of other companies Air Conditioners.
l
This product is designed for standard air conditioning only.
DO NOT use this product for specic purposes, such as restoring foods, animals & plants, precision
devices, art objects, etc.
l
No part of this manual may be reproduced without written permission.
l
Signal words are used to identify levels of hazard seriousness.
Denitions for identifying hazard levels are provided below with their respective signal words.
: DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
: WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
: CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.
: NOTICE is used to address practices not related to personal injury.
NOTE
: NOTE is useful information for operation and/or maintenance.
l
Perform the test run whether there is abnormality or not after the installation work is completed.
The usage and the maintenance should be explained to a user according to “Installation & Maintenance
Manual” of the indoor unit. Describe to keep this installation manual also.
l
It is assumed that this kit will be installed and serviced by English speaking people. If this is not the case,
the customer should add safety, caution and operating signs in the native language.
l
If you have any questions, contact your distributor or dealer of HITACHI.
l
This manual gives a common description and information for this wireless remote control switch which you
operate as well as for other models.
l
DO NOT install the unit in the following places. It causes failure to the unit in many cases.
* Places where oil (including machinery oil) mist and steam drifts.
* Places where a lots of sulde gas drifts such as in hot spring.
* Places where inammable gas may generate or ow.
* Places where air contains high salt contents as coast regions.
* Places where with atmosphere of acidity or alkalinity.
l
Pay attention to the following points when the unit is installed in a hospital or other facilities where
electromagnetic wave generates from medical equipment.
* Do not install the unit in the place where the electromagnetic wave is directly radiated to the electrical
box, remote control switch cable or remote control switch.
* Install the unit at least 3 meters away from electromagnetic wave such as a radio.
l
DO NOT install the unit in the place where the air ow directly catches to animals or plants.
It
could be the cause of adverse affect to animals or plants.
To Next Page
Need help?
General
