– 21 –
2. CLEANING OF FRONT PANEL
CAUTION
● Never use hot water (above 40°C), benzine, gasoline, acid, thinner
or a brush, because they will damage the plastic surface and the
coating.
Removing the Front Panel
● When the front panel is fully opened with both
hands, push the right arm to the inside to
release it, and while closing the front panel
slightly, pull it out forward.
Attaching the Front Panel
● Move the projections of the left and right
arms into the Flanges in the unit and securely
insert them into the holes.
!
● Remove the front panel and wash with clean
water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly
with clean water.
● When front panel is not removed, wipe it with
a soft dry cloth. Wipe the remote controller
thoroughly with a soft dry cloth.
● Wipe the water thoroughly.
If water remains at indicators or signal
receiver of indoor unit, it causes trouble.
Method of removing the front panel.
Be sure to hold the front panel with both
hands to detach and attach it.
RAS/RAC-PH30HLT (17-24).indd 21RAS/RAC-PH30HLT (17-24).indd 21
To Next Page
Loading...
