ECO OPERATION
Energy saving operation by changing set temperature and by limiting the maximum power consumption value.
L.H
By pressing the (ECO) button during Auto, Heating,
Dehumidifying or Cooling operation, the air conditioner
performs the “ECO” operation.
NOTE
In case the power consumption is already low,ECO operation will not reduce the
power consumption.
By pressing (POWERFUL) button, ECO operation is cancelled.
After auto restart, ECO operation is cancelled and previous operation mode shall start.
t
t
t
CANCEL
START
Press (ECO) button during operation.
is displayed on the LCD.
Press (START/STOP) button.
Press (ECO) button again
“ ” disappears from the LCD.
t
t
t
t
Energy saving operation will start by changing
the set temperature higher or lower and
saving operation power consumption.
– 6 –
ADJUSTING THE AIRFLOW DIRECTION
1
2
Vertical
Vertical
about 10°
about 40°
When cooling,
dehumidifying
When heating
about 10°
about 45°
Hold the vertical air deflector as shown on the right and
adjust the airflow to left and right.
Adjust the airflow upward and downward.
The adjusting range of the horizontal air deflector is shown
on the right.
Adjust the airflow to left and right.
HOW TO EXCHANGE THE BATTERIES IN THE REMOTE CONTROLLER
Horizontal
Horizontal
ENGLISH
– 7 –
To Next Page
Loading...
