The fan speed in Cooling mode during thermo off can be changed by the remote controller.
(This procedure shall be implemented strictly by service personnel only.)
It is possible to return it to the default setting.
PROCEDURE
Press
[POWERFUL] button and [TIME
∧
(UP)]] button simultaneously for about 5 seconds
when the remote controller is OFF.
Transmission sign lights up with beep from indoor unit simultaneously.
Beep sound pattern : 1) Default setting : Short beep
2) Changed setting : Double beep
HOW TO CHANGE THE FAN SPEED IN COOLING MODE DURING THERMO OFF
2) Changed setting : Double beep
NOTE :
(1) The selected fan speed will remain unchanged after the unit is turned off.
(2) If Timer reservation has been set, it will be canceled.
(3) During time setting and timer setting, this operation cannot be set.
2) Changed setting : Double beep
Beep sound pattern :
2) Changed setting : Double beep
To Next Page
Loading...
