Terminal Cover
1. Electrical Parts
(1) Remove the top cover fixing screws
and lift the cover to remove it.
(2) Remove the handle cover fixing screws
and push it down to take it out.
(3) Remove the electrical box fixing
screws.
2. Dismantle procedure of MAIN PWB.
(1) Remove terminal cover.
(2) Remove the terminal block screw,inductance
line,line clip,GRN wire,LN123 wire.
Fig.9
Fig.10
Inductance Line
Line Clip
Terminal Screw
Earth Line
Fig.11
(3) Set the electrical box upside down.
Fig.12
OUTDOOR UNIT
Procedure for Disassembly and Reassembly
MODEL RAC-EH18WHLAE,RAC-EH24WHLAE
- 1
04
-
To Next Page
Loading...
