– 6 –
INSTALLING ANTI-MOLD WASABI CASSETTE
1
Open the front panel.
2
Install the anti-mold wasabi cassette.
• Do not hold the movable panel when
opening and closing the front panel.
Front panel
Gripping part
Gripping part
• Hold and lift up the front panel.
• Push up the panel support until it
clicks to lock it.
Lower the front panel and fix in
position with the panel support.
Panel support
CAUTION
• Do not open the front panel during operation.
It may interrupt the movable panel to work properly.
Be sure to stop the operation first before opening
the front panel.
• Remove the dust box • Take out the anti-mold wasabi
cassette from the aluminium bag.
• Slide the anti-mold
wasabi cassette that
has been taken out of
the wrapper directly
into the Dust Box.
Do not remove or tear
the aluminium sheet on
the surface nor make a
hole on it.
Dust Box
Handle
Dust Box
Anti-mold wasabi
cassette
Aluminium bag
CAUTION
• Do not put your face close to the package when
you open it.
Your eyes or nose may be irritated by wasabi aroma.
• Do NOT eat.
No daily maintenance is required. However,
the effectiveness of anti-mold wasabi cassette
will be lost after approximately 10 years have
elapsed. Replace the anti-mold wasabi cassette
in such event.
To Next Page
Loading...
