NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT
This controls the operation function and timer setting of the room air conditioner. The range of
control is about 4 meters. If indoor lighting is controlled electronically, the range of control may be
shorter.
Precautions for Use
Do not put the remote controller under direct sunlight and high temperature.
Do not drop it on the floor, and protectit from water.
If you press the FUNCTION button during operation, the air conditioner may stop for
about 3 minutes for protection before you can start it again.
START/STOP Button
Press this button to start operation.
Press it again to stop operation.
SLEEP Button
Use this button to set the sleep timer.
( Page 10)
Reserve Button
Timer setting reservation.
OFF TIMER Button
Select the turn OFF time.
ON TIMER Button
Select the turn ON time.
Transmission Sign
The transmission sign blinks
when a signal has been send.
TEMPERATURE Button
Room temperuture setting.
Value will change quicker when
keep pressing.
( Page 7)
FAN SPEED Button
Select the fan speed for
cooling and heating mode.
( Page 8)
AUTO SWING Button
Control the angle of the
horizontal air deflector.
( Page 12)
CANCEL Button
Cancel timer reservation.
Signal Transmission
FUNCTION Button
Select the operation mode.
( Page 8)
C
Hr.
HITACHI
°
C
− 10 −
To Next Page
Loading...
