EasyManua.ls Logo

Hitachi RAS-24MH1 - NAMES AND FUNCTIONS OF EACH PART; INDOOR UNIT; OUTDOOR UNIT

Hitachi RAS-24MH1
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 8 –
INDOOR UNIT
NAMES AND FUNCTIONS OF EACH PART
Air lter
To prevent dust from coming into the indoor unit.
(Refer page 23)
Front panel
Indoor unit indicators
Light indicator showing the operating condition.
(Refer page 9)
Horizontal de ector
Vertical de ector
(Air Outlet)
Remote controller
Send out operation signal to the indoor unit. So as
to operate the whole unit.
(Refer page 10)
WIDTH (mm)
1030
850
MODEL
RAS-24MH1
RAC-24MH1
HEIGHT (mm)
295
650
DEPTH (mm)
207
298
MODEL NAME AND DIMENSIONS
OUTDOOR UNIT
DRAIN PIPE
Condensed water drain to outside.
CONNECTING CORD
AIR INLET (BACK, LEFT SIDE)
AIR OUTLET
In case of removing the air purifying lters, please follow the above procedures.
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air purifying
lters are used. So, set the fan speed to "HIGH" when using it in this condition.
Air purifying lters are not washable. It is recommended to use vacuum to clean it. It can be use for 1
year time. Type number for this air purifying lter is <SPX-NTW1>. Please use this number for ordering
when you want to renew it.
Do not operate the air conditioner without lter. Dust may enter the air conditioner and fault may occur.
NOTE

Related product manuals