(2) Fault codes indicated by LED lamps on display panel
Lamp RUN (LED2, Red) and Lamp DEFROST (LED5, Green) flash. Lamp RUN display fault code
is represented by 2- digit number, and lamp DEFROST display fault code is represented by single
digit number (as shown fig. below). For example,fault code 36: LED RUN & defrost flash 3 times
at the same time, and LED DEFROST continue flashing 3 times, reports No. 36 fault.
Display panel
1 2
2.TROUBLESHOOTING
1
2
Run indicator (Red)
Indicates the fault code represented by 2-digit number.
Defrost indicator (Green)
Indicates the fault code represented by single digit number.
D E FR O S T
F I LT E R
T I ME
R U N
E M ER G E NC Y
2
1
2 1
LED FALSH CONTROL flash 300mS (T1) off 300mS(T2), after 2000mS (T3) fault code repeat displays. (as shown below)
T1 T2 T3
FIG.2 LED flash control
To Next Page
Loading...
