Hitachi RAS-(4-12)HNP(1)(E) - Setting the DIP Switches for the Outdoor Unit; Quantity and Position of DIP Switches

4 Electrical wiring
102
SMGB0087 rev.0 - 12/2013
4.3 SettingtheDIPswitchesfortheoutdoorunit
4.3.1 Quantity and position of DIP switches
The PCB in the outdoor unit is operating with DIP switches and push switches. The location is as follows:
RAS-(2/2.5)HVNP1 / RAS-3HVNC1
PCB1
PCB2
RAS-(3-12)H(V)N(P/C)(1)(E)
 N O T E
DIP-IPMorPCB2(dependingonmodel)hasaDSW1.Whenpinnumber1issettoONposition,theelectricalcurrent
detectionsiscanceled.Pinnumber1shouldbetoOFFpositionafterelectricalwork.