Hitachi RAS-(4-12)HNP(1)(E) - Removing Service Cover; Remove Outlet Grille

10 Servicing
361
SMGB0087 rev.0 - 12/2013
10
10.3 RAS-3HVNP1E
10.3.1 Removing service cover
N O T E
• Follow the procedure below to remove main parts and components. For mounting follow the reverse procedure of
removal.
• Donotexposetherefrigerantcycletotheatmosphereforalongperiodtoavoidmoistureordustenteringintothecycle.
Besuretoreplacepartsimmediatelyafterremoving.Sealtherefrigerantcyclewhenleftunattachedforalongperiod.
Pull downward and remove the service cover after removing 3 upper
and lower xing screws.
Pay attention not to drop the service cover.
1
1 Service cover.
10.3.2 Remove outlet grille
Remove 4 screws which x the outlet grille.
1 Air outlet grille.
2
Shroud.