Hitachi RAS-4-HNC - Oudoor Units RAS-(8-10)HNPE; Removing Air Outlet Grille; Removing Service Cover

10. Servicing
360
SMGB0079 rev.0 - 01/2013
10.3.3 Oudoor units RAS-(8-10)HNPE
10.3.3.1 Removing service cover
N O T E
• Followtheprocedurebelowtoremovemainpartsandcomponents.Formountingfollowthereverseprocedu-
reofremoval.
• Donotexposetherefrigerantcycletotheatmosphereforalongperiodtoavoidmoistureordustenteringinto
thecycle.Besuretoreplacepartsimmediatelyafterremoving.Sealtherefrigerantcyclewhenleftunattached
foralongperiod.
1 Remove the 4 xing screws, slide the service cover downward
and remove it.
• Pay attention not to fall off the service cover.
Service Cover
Service cover
10.3.3.2 Removing air outlet grille
1 Remove the 8 xing screws of the shroud.
Air Outlet Grille
Air Outlet Grille
Shroud
Air outlet grille
Shroud
Air outlet grille