Hitachi RAS-4-HNC - Outdoor Units RAS-12 HNC; Removing Air Outlet Grille; Removing Service Cover

10. Servicing
423
SMGB0079 rev.0 - 01/2013
10
10.4.3 Outdoor Units RAS-12HNC
10.4.3.1 Removing service cover
N O T E
• Followtheprocedurebelowtoremovemainpartsandcomponents.Formountingfollowthereverseprocedu-
reofremoval.
• Donotexposetherefrigerantcycletotheatmosphereforalongperiodtoavoidmoistureordustenteringinto
thecycle.Besuretoreplacepartsimmediatelyafterremoving.Sealtherefrigerantcyclewhenleftunattached
foralongperiod.
1 Remove the 5 xing screws, slide the service cover downward
and remove it.
• Pay attention not to fall off the service cover.
Service cover
10.4.3.2 Removing air outlet grille
1 Remove the 8 xing screws of the shroud.
Air Outlet Grille
Air Outlet Grille
Shroud
Air outlet grille
Shroud
Air outlet grille