2. Unit Installation
15
SMGB0079 rev.0 - 01/2013
2
2.2 Transportation of outdoor unit
D A N G E R
Donotputanyforeignmaterialintotheoutdoorunitandchecktoensurethatnoneexistsintheoutdoorunit
beforetheinstallationandtestrun.Otherwiseareorfailurewilloccur.
C A U T I O N
Transporttheproductsasclosetotheinstallationlocationaspracticalbeforeunpacking.
Hanging Method
When hanging the unit ensure the balance of the unit check safety and lift it up smoothly. Do not remove any packing ma-
terials and hang the unit under packing condition with two ropes as shown below.
RAS-(2-3)HVNP(E) RAS-(4-6)H(V)NPE
RAS-3HVNC RAS-(8-10)HN(P/C)E
RAS-(4-6)H(V)NCE RAS-12HN(P/C)
1
A
B
C
D
1
A
B
C
1. Wire rope.
A. Over 60º.
B. 0.7 to 1.0 m.
C. Do not remove the plastic band or the corrugate paper frame.
D. Pass the wire ropes through each lifting hole in the wooden base as shown.
C A U T I O N
• Lifttheoutdoorunitinitsfactorypackagingwith2wireropes.
• Forsafetyreasonsensurethattheoutdoorunitisliftedsmoothlyanddoesnotlean.
• Donotattachliftingequipmenttotheplasticbandorthecorrugatedpaperframebecauseoftheropeswillslip
orbreakthematerials.
• Ensurethattheexterioroftheunitisadequatelyprotectedwithclothorpaper.
Gross weight
Premium series
Model Weight (kg)
RAS-(2-2.5)HVNP 46
RAS-3HVNPE 77
RAS-(4-6)H(V)NPE 116
RAS-8HNPE 149
RAS-10HNPE 151
RAS-12HNP 174
Standard series
Model Weight (kg)
RAS-3HVNC 49
RAS-4H(V)NCE 78
RAS-(5-6)H(V)NCE 90
RAS-8HNCE 149
RAS-10HNCE 151
RAS-12HNC 174