Hitachi RAS-4HRNME-AF - Easy Unit Installation

2. Features and benets
TCGB0075 rev.0 - 11/2012
38
2.3.2 Easy unit installation
Easier unit installation due to the following aspects:

Compact size
•
Reduced unit dimensions:
-
Both indoor unit and DHW tank models are 595 mm of width, very suitable for indoor utility room (<600 mm).
-
Indoor unit with integrated tank DHWS195S-2.0H1E is lower than 2m of height.
•
Steel plate cover: The material used for the service cover improves its rigidity.
• Hidden LCD user’s interface (for domestic hot water tank): The LCD user’s interface is hidden and protected by its
service cover.
RWH-(4.0-6.0)FS(V)NFE DHWS195S-2.0H1E
DHWS260S-2.0H1E
RWH-(4.0-6.0)FS(V)NFE
DHWS195S-2.0H1E
RWH-(4.0-6.0)FS(V)NFE
DHWS260S-2.0H1E
+
+
N O T E
Height dimensions are shown with the minimum mounting foot height. These values can be adjusted up to +30
mm.

Many piping outlet possibilities
Refrigerant piping and exible water piping outlet can be done both vertical and horizontal outlet. It will depend on the
decided installation type.
Holes for
refrigerant piping
Holes for exible
water piping
Hole for wiring
connection
Example 1
Example 2