4. DISASSEMBLY AND ASSEMBLY FOR COMPRESSOR AND MOTOR
Step Illustration Handling instruction
1. Loosen the screws holding the
electric box cover and electric
box.
Use screwdriver to loosen the
Electric box.
2. Loosen the screws
holding condensate pan
and remove the condensate
pan.
Use screwdriver to loosen the
screws holding the drain pan in
place.
3. Loosen the bolts holding the
fan blades in place and
remove the fan blade.
Use a wrench or socket to
carefully remove the fan blade
bolts.
4. Loosen the screws holding the
motor in place and remove the
motor and replace it.
Use screwdriver to loosen the
screws holding the motor.
Cassette type
Rem
oval
and Assembly of
Fan Motor
Important: Before removing the fan, make sure the power is off.
To Next Page
Loading...
