– 10 –
ONE-TOUCH POWERFUL
Press the button.
● Operation start with a signal received sound “beep”.
● Unit will be forced operate in (COOL) with SUPER COOL
fan speed for 20 minutes.
Indicator appear during this
period while temperature and fan speed setting display remain
unchanged. (Operation lamp at indoor unit is blinking).
● After 20 minutes, operation lamp stop blinking and
indicator will disappear while unit will be in
(COOL) mode.
Temperature and fan speed will change to previous setting.
● Air blow sound will be slightly high due to forced operation.
1
NOTE
(1) OFF TIME setting : OFF timer will be a priority over the
POWERFUL operation time.
(2) ON TIME setting : POWERFUL operation will be a priority
over the ON timer operation time.
CANCELLATION of POWERFUL Operation
Cancel Condition
Operation mode after cancel
Press or OFF timer time is up
Stop operation
key press
DEHUMIDIFYING operation
Press or
Press
or
Press
or
20 minutes time is up
Normal COOLING operation
key press
CIRCULATION operation
COOLING operation
(SLEEP Mode)
Press SLEEP operation
RAS-V10CDT-V13CDT (EN1) 10RAS-V10CDT-V13CDT (EN1) 10 1/4/14 10:31 AM1/4/14 10:31 AM
To Next Page
Loading...
Need help?
General
