Hitachi RPI-1.0FSG1 - 1.3 Procedure of Checking Each Main Parts; 1.3.1 Self-Checking of PCBs using Remote Control Switch

1-93
TROUBLESHOOTING
NOTES:
1. During protection control (except during alarm stoppage), the protection control code is indicated.
2. The protection control code is indicated during protection control and turns off when canceling the
protection control.
3. After retry control, the condition of monitoring is continued for 30 minutes.
4. The maximum value (*1) is as follows.
8HP
10HP
16HP
20HP
Comp.2 Comp.3, 4 Comp.2 Comp.3, 4 Comp.2 Comp.3, 4
24HP 17.8A 21.6A 18.8A 22.8A 36.2A 43.9A
30HP 17.8A 31.7A 18.8A 33.4A 36.2A 64.5A
23.9A
30.5A
36.2A
36.2A
12.6A
15.8A
18.8A
18.8A
380-415V 50Hz 380V 60Hz 220V 60Hz
380-415V 50Hz 380V 60Hz 220V 60Hz
12.1A
15.0A
17.8A
17.8A