Hitachi RPI-1.0FSG1 - Removing Front Service Panel

2-2
SERVICING
(2.1 Outdoor Unit)
2.1.2 Removing Front Service Panel
Remove five (5) screws per each panel.
Slightly lift the panels upward and remove them.
Phillips ScrewdriverTool
NOTE:
When removing screws for front service panel, remove the screw at the lower part of panel firstly.
Screw
Remove this first.
Screw
Remove this first.
Screw
Remove this first.
TURN OFF all power source switches.
RAS-5FSG to RAS-10FSG,
RAS-5FS3 to RAS-10FS3,
RAS-8FXG, RAS-10FXG,
RAS-8FX3, RAS-10FX3
RAS-16FSG, RAS-20FSG,
RAS-16FS3, RAS-20FS3
RAS-24FSG1, RAS-30FSG1,
RAS-24FS5, RAS-30FS5