2-87
SERVICING
(2.6 Wall Type)
TURN OFF all power source switches.
Phillips Screwdriver,
Bucket (approx. 5 liters content)
Tool
2.6.7 Removing Drain Pan
(1) Remove the front panel according to the item 2.6.2 “Removing Front Panel”.
(2) Remove the electrical box according to the item 2.6.5 “Removing Electrical Box Cover”.
(3) Remove the drain pan from the unit by releasing the catches (A) and (B) from the left side of the
drain pan, and releasing the catch (C) by pulling the right side of the air panel toward the front side.
(4) For attaching the drain pan, perform the reverse procedures for removing drain pan.
NOTE:
Check to ensure that the catches (A), (B) and (C) are snapped.
Heat Exchanger
Release Catch (A)
Drain Pan
Draw the pan forwards
Release Catch (C)
Heat Exchanger
Release Catch (B)
To Next Page
Loading...
