Hitachi UX2-D160W - Printing by Substituting Different Characters for Date (Substitution Rules)

Chapter 6. Character Print
6-13
Chapter 6.
6.2.3. Printing by Substituting Different Characters for Date (Substitution Rules)
This section describes printing operation of substituting different characters for dates.
(1) Substitution rule function
● Prints the date and time by replacing it with the specified characters.
● Select one substitution rule No. for one calendar block.
● A substitution rule No. can be shared between multiple calendar blocks.
Maximum number of substitution rules
Model type
Maximum number of substitution rules
UX2-D
48 (Upgrade option: Up to 99)
● Kana, alphanumeric characters, and user patterns can be set as substitution characters.
● Substitution characters for the year are applied for 25 years from the year of the calendar date.
[Note] Substitution characters for the year are deleted for the previous year as a year passes. At this time,
the substitution characters after 25 years become spaces.
If the current date and time [Year] is set to the past, the substitution characters for the present year
also become spaces.
(2) Zero-suppression function
● Prints by replacing "0" in the leftmost digit of the calendar characters with a space. Alternatively, it
prints characters left-aligned with "0" deleted.
Example of zero-suppression (Time: 2024.01.02 03:04)
Setting
Printing result
Zero-suppression
disable
Enable (space)
Enable
(left-aligned)
YY. MM. DD
24. 01. 02
24. □1. □2
24. 1. 2□□
HH:MM
03:04
□3:□4
3:4□□
(□ = space)