Hitachi UX2-D160W - Editing Pattern of Standard Character

Chapter 7. Auxiliary Functions
7-42
7.5. Editing Pattern of Standard Character
This section describes how to edit the standard character patterns.
(1) Functions
● Edits the character pattern in dots.
● Edits single-byte symbols as different patterns from the double-byte symbols.
● Chinese character patterns are not edited.
● The operation of editing patterns is the same as the function for creating user patterns.
● The characters whose patterns have been changed are displayed in blue on the keyboard.
● Use the [Edit standard pattern] function after creating the pattern printing with the [Create user pattern]
function and establishing the pattern design.
● The original pattern before the change can be restored.
(2) Operation
In [Setting (2/3)] menu, press Edit Standard pattern.
The [Edit Standard pattern] screen appears.
[Edit Standard pattern] screen
Press Select.
The [Select message] screen appears.
1
Dot pattern
creation area
Select
Dot matrix
2