Hitachi UX2 - Page 177

153
Character
orientation
QR code printing
Printing example
Remarks
0 or 1
180-degree rotation
Rotated by 180
degrees and printed.
Normal
Printed in normal
direction.
2 or 3
180-degree rotation
Printed in normal
direction.
Normal
Rotated by 180
degrees and printed.
[About QR code 33×33]
● If the all conditions of the Table below are satisfied, dot matrix "QR33" and Bar code "QR(33×33)" will
appear on Print format screen.
● Ink drop use percentage : For better printing quality, ink drop use percentage should be set to 1/7 or 1/6.
● Printing direction of QR code 33×33 : For better printing quality, QR code 33×33 should be printed in a state
where is rotated by 180 degrees.
The conditions for printing QR code 33×33
No.
Item
Condition
1
Format Setup
Individual setup or Overall setup
2
Column for QR code 33×33
1 line
3
Ink drop use percentage
1/2 - 1/16
4
QR Error correction level
M (15%)
● Edit message screen : When the print item of QR code 33×33 is selected, "FNC1", "RS" and "EOT" button
appear on the keyboard and can be input QR code 33×33.
Available control codes for QR code 33×33
No.
Control code
Usage
1
FNC1(GS)
The control code that indicates GS1 standard symbol or where the data
ends.
2
RS
The control code that indicates the end of strings (record).
3
EOT
The control code that indicates the conclusion of a transmission.