Hitachi Virtual Storage Platform 5000 Series - Page 38

Number Item Description
1 ACT Green: Indicates FMD
status.
Blinking Green: Indicates
that the FMD is active.
The blink speed may dier
between FMD LEDs;
however, this does not
indicate a disk error or
failure.
2 ALM Red: Indicates that the
removal of the FMD is
possible when the storage
system is powered on.
3 POWER Green: Indicates that the
power supply is supplied to
the storage system.
4 READY Green: Indicates that the
ENC is operating normally.
Drive box
Chapter 2: Hardware overview
Hitachi Virtual Storage Platform 5000 Series Hardware Guide 38