Hitachi VSP F350 - Configure Syslog and SNMP Notifications; Make Host Connections

Next steps
(Optional) Congure syslog and SNMP notications.
Configure syslog and SNMP notifications
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. In the navigation tree of the maintenance utility, under Administration, click Alert
Notications. Then click Set Up in the Alert Notications pane on the right.
Note: Although a tab is provided for conguring email notications, we
recommend that you set up email notications using Hi-Track Remote
Monitoring system.
2. To congure the storage system to send notications in syslog format, complete the
settings in the Syslog tab. Then open a rewall port on your network for
transferring syslogs.
3. To congure the storage system to send notications as SNMP traps, complete the
settings in the SNMP tab.
4. Click Apply, and then click OK.
Step 7: Make host connections
Congure
syslog and SNMP notications
Installing your storage system
Storage system installation (without SVP) 27