Item Length in characters Characters that can be used
User name 1-20
• Alphanumeric (ASCII code)
characters
• The following symbols
1, 3
:
- . _
Password 6-63
• Alphanumeric (ASCII code)
characters
• The following symbols
1, 2
:
- , . : @ _
Note:
1. If the host on which CCI is installed is running on UNIX, a slash (/) can be specified.
2. If the host on which CCI is installed is running on Windows, a back slash (\) can be specified.
3. Do not specify a user name consisting of periods (.) (..) only, or specify a user name
beginning with a hyphen (-). If you specify such names, you cannot log in to NAS Manager.
Note: To use NAS Manager after installing NAS modules, users created with
DKCMAIN firmware 83-03-2x or earlier, must change the password. If you do
not change the password, you cannot log in to NAS Manager. Also, if a user
name contains more than 20 characters, the user cannot log in to NAS
Manager.
User name and password for Device Manager - Storage Navigator
Item
Length in
characters
Characters that can be used
User name 1-256
• Alphanumeric (ASCII code) characters
• The following symbols:
# $ % & ' * + - . / = ? @ ^ _ ` { | } ~
You cannot use the # symbol when you enter a user name in
a screen from the Tool Panel dialog box.
Password 6-256
• Alphanumeric (ASCII code) characters
• All symbols
You cannot use the quotation mark (") or backslash (\)
symbols when you enter a password in a screen from the
Tool Panel dialog box.
Note: If you cannot log in on a Tool Panel dialog box screen, check to see if
you have used a number sign (#) in the user name, or used a quotation
mark (") or a backslash (\) in the password.
User name and password for logging in to SVP
Item
Length in
characters
Characters that can be used
User name 1-128
• Alphanumeric (ASCII code) characters
154 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
