raidcom modify journal
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 5003 The parameter of inflow control cannot be changed
because the specified journal is not a primary
journal.
CMDRJE Executing 2E30 5005 The cache mode option or the data overflow
monitoring time cannot be changed because the
specified journal is used by both the primary and
the secondary journals.
CMDRJE Executing 2EE4 50EE An internal error occurred.
Call Hitachi Data Systems customer support.
Table 9-23 SSB codes returned by raidcom modify ldev
raidcom modify ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
CMDRJE Executing B980 B906 An LDEV for which an LU path is set in NAS
Platform (User LU) cannot have the Command
Device attribute.
Table 9-24 SSB codes returned by raidcom modify ldev -alua
raidcom modify ldev -alua
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
CMDRJE Executing 2E11 0059 The status of the GAD pair is not able to change
ALUA.
CMDRJE Executing 2E11 800F The operation cannot be performed because the
unsupported microcode version exists in the
system.
CMDRJE Executing 2E20 0000 The specified LDEV is not installed.
CMDRJE Executing 2E23 1001 The number of the host groups which can be set by
ALUA exceeded the maximum.
CMDRJE Executing 2EE8 FEEC An internal error occurred.
Troubleshooting
9-51
Command Control Interface User and Reference Guide
To Next Page
Loading...
