Hitachi YUTAKI S80 Series - Solar Combination

ENGLISH
8.6.1.9 Solar Combination
Available if Solar combination (SOLStSet)= “Input demand” or “Total” In the “Complementary Heating” option of the “System
Conguration” menu.
REF Access Description
Default
Value
Range Steps Units Application
Notes
Solar Combination S SC S80 M
SOLOp Operation - Demand ON/OFF - - ○ ○ ○ ○ -
SOlPt SOL Panel T - - - ºC ○ ○ ○ ○ (*1)
? NOTE
(*1): If Solar combination (SOLStSet)= “Total control”
8.6.1.10 Alarm History
It shows the alarms of the system. To clear the selected alarms press “ ”.
8.6.1.11 Energy data
Available if Status (PMConf) or Capacity conguration (CAPCo.)= “Enabled” in “Optional functions” option of the “System
Conguration” menu and Controller type (LCDM)= “Unit” or “Unit + Room”.
• Input Power (*1)
• Capacity (*2)
• Reset Values
? NOTE
• (*1): If Status (PMConf)= “Enabled” in the “Optional functions” option of the “System Conguration” menu.
• (*2): If Capacity conguration (CAPCo.)= “Enabled” in the “Optional functions” option of the “System Conguration” menu.

Input Power
The following parameters can be displayed by each month selecting the specied month or for all the months selecting “Total”.
REF Access Description
Default
Value
Range Steps Units Application
Notes
Input Power S SC S80 M
IpSH Space Heating - - - kWh ○ ○ ○ ○ -
IpSC Space Cooling - - - kWh ○ ○ ○ ○ -
IpDHW DHW - - - kWh ○ ○ ○ ○ -
IpSWP Swimming pool - - - kWh ○ ○ ○ ○ -
IpTot Total - - - kWh ○ ○ ○ ○ -
UNIT CONTROLLER
PMML0335A rev.1 - 04/2016
135