Need help?Do you have a question about the HiWeigh CCX30 and is the answer not in the manual?
Details the purpose and operation of each key on the scale's keypad.
Guides through the zero and span calibration process for the scale.
Explains the procedure for performing a zero calibration on the scale.
Outlines the steps for conducting a span calibration of the scale.
Instructions for setting the unit weight for counting operations.
How to input the sample quantity for piece counting.
Describes setting upper and lower limits for counting or weighing.
Accessing internal values like span, battery voltage, and zero.
Configuration for enabling or disabling the auto-average function for piece weight.
Setting the time interval for the scale's automatic power-off feature.
Options for controlling the display backlight (off, auto, on).
Settings for accumulation modes, including stability requirements.
Configuration of RS232 communication, baud rates, and output formats.
Adjusting the Analog-to-Digital Converter (ADC) update speed.
Setting the display behavior when the scale reads zero.
To Next Page
General