Hiwin D1-N Series - Page 170

170 / 183
Assembly and Commissioning Instructions Servo amplifier D1-N

15.10.2015
Figure 10.10: “Message window” – “Messages + command prompts”
Task 1 (see Figure 10.8) can be stopped using the following command:
stop 1
Enter commands in message window and press the Enter button.
Figure 10.11: “Message window” – stopping task 1
The drive amplifier confirms the command with “
OK
”.
To check, you can open “PDL Task List” (see Figure 10.7 and Figure 10.8)