Hiwin LAS3-1 - Page 8

MA99UE17-1804
7
TYPE
Max.
Push Force
(N)
Max.
Pull Force
(N)
Max. Cyrrent(A)
Max Holing Force (N)
Speed
(mm/s)
LAN5-1
8000
4000
24VDC
24VDC
(24Q)
24VDC
24VDC(24Q)
24VDC
24VDC(24Q)
7000(24Q)
5
5
8
6000
6000
2-3.5
5-7
LAN5-2
6000
4000
4.5
8
5000
5000
3-4.5
7-9
LAN5-3 4000 3000 4 6 4000 4000 4-5.5 9-11
LAN5-4 3000 2000 4 6 1500 1500 6-9 14-19
LAC1 2000 500 5 8 2000 8-12 13-16
NOTE：The test results are obtained by using the 12VDC or 24VDC power supply.
1.2 Input Voltage: 24VDC or 12 VDC; tolerance ±10%. The rated voltage of actuator is indicated in the label
or enclosed document.
1.3 Rated Duty Cycle: 10%
Definition: 2mis work and 18min pause.
1.4 Protection Class: IP54 (if not specially indicated)
1.5 Operating Temperature: +5℃ ~ +40℃ (+41°F ~ 104°F)
1.6 Atmospheric Pressure 860~1060hpa(12.5~15.4psi).
1.7 Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen
or nitrous oxide.