Hiyoshi DP70-BN1 - Maintenance and Caution

4-1
1 The probe should never be exposed to temperatures of 100℃ or more.
2. In case of "Out of Range"
3.
4.
As measuring errors will be caused by clogging of the hole or the net at the tip of the probe,they
should be cleaned from time to time with a soft hair brush or by washing with alcohol,bezine,etc.
5. The digital display shows strange characters sometimes instantaneously .It is no problem for
LCD'S character.
6. Auto switch off : 20 min.after last key press .
Output :0～1VDC/0～30m
Model:DP70-BN1
4-1 Maintenance and Caution
Under Range
Over Range
Wind Velocity
------
Temparature
Blinking Values and dots"………"
Blinking Values