Need help?Do you have a question about the HKC Quantum70 and is the answer not in the manual?
General| Brand | HKC |
|---|---|
| Model | Quantum70 |
| Category | Control Panel |
| Language | English |
Unsets the alarm system, returning it to a ready state.
Arms the system with an exit timer for leaving the premises.
Arms the system quickly, typically without an exit timer.
Partially arms the system, inhibiting zones assigned to system A.
Partially arms the system, inhibiting zones assigned to system B.
Accesses and displays recent system events and logs.
Initiates a walk test to verify zone functionality.
Controls the chime feature for specific zones.
Performs a test of the system's sirens and bells.
Enters the manager menu for advanced system features.
Configures the system's current date and time settings.
Displays engineering logs for system diagnostics.
Manages user access codes, including adding new ones.
Adjusts specific features and permissions for user codes.
Assigns custom names to user codes for easier identification.
Assigns user codes to specific system blocks or areas.
Links proximity fobs or tags to user codes for access.
Accesses system-wide configuration settings, often requiring engineer access.
Step-by-step guide to inhibiting a single zone.
Step-by-step guide to inhibiting multiple zones.
Guide on forced arming with specific open zones.
Details on using the keyfob's Quick Key functionality.
Details on using the keyfob's Secure Unset mode.
To Next Page
