HKC SecureWatch Series - Arming and Unsetting Your System; Arming your system; Unsetting your system; Requesting the log of recent events

Text your User Code followed by a space and the word ARM to your
system.
Text your User Code followed by a space and the word UNSET to
your system.
Text your User Code followed by a space, then the word LOG
followed by another space and the number of log events (between 1
and 21) to your system.
Depending on the status of your system
you will receive one of the following
confirmation messages;
Confirmed System Armed or
System Already Armed or
System Not Ready to Arm
Depending on the status of your system
you will receive one of the following
confirmation messages;
Confirmed System Unset or
System Already Unset
Depending on how many log events
you request this command might
involve several text messages from the
system to your phone
Notes:
1) If you prefer, the word SET can be used instead of ARM
2) Part arm your system by texting User Code followed by ARM A or ARM B
2222 is being used as a User code for illustrative purposes only
Note: 2222 LOG will send the last 7 log events.
4
2222 ARM
2222 UNSET
2222 LOG 2
Arming your system
Unsetting your system
3)When sending commands, we strongly recommend that you turn off the
predictive text feature on your phone.
Requesting the log of recent events
Note: If you prefer, the word DISARM can be used instead of UNSET
ABC
ABC
ABC